Injection molding of thermoplastic elastomers
We consider not only the material, but the entire function: What load acts on the component? How much must it deform? What friction, damping, restoring force or tactile feedback is required? And how can an economical, durable series solution be developed from this?
Key data in focus
Thermoplastic elastomers (TPE), including TPU, for elastic components
Materials
25–300 t
Locking forces
Small, medium and large series
Series
Components with damping, protective, friction-resistant and tactile functions
Functions
ISO 9001
Made in Austria
Special solution
What is elastomer injection molding of thermoplastics possible makes
In elastomer injection molding, thermoplastic elastomers are heated, plasticized, and injected into a mold as a granulate. After cooling, an elastic molded part with a defined geometry is formed. Unlike conventional elastomers that are permanently bonded, thermoplastic elastomers are melted and processed again during the process.
The choice of material depends on the intended use later on. Hardness, elasticity, friction, abrasion, temperature resistance, media resistance and return behavior They must be considered together. A soft material is not automatically the best solution. What matters is how the component is subjected to real-world loads.
Targeted use of elasticity
Elastomers can absorb motion, dampen shocks, reduce vibrations, and protect contact surfaces. Depending on the design, components can be configured to reliably absorb pressure, tensile forces, bending, or repeated movements.
Traction and grip
Where components are intended to be held securely, guided or protected from slipping, thermoplastic elastomers can specifically exert their adhesive friction. This gives adhesive friction surfaces, grips, runners or support elements a functional surface, without requiring additional coatings or retrofitted rubber elements.
Protection and damping directly in the component
Elastomers can protect sensitive contact points and absorb mechanical loads. Cover caps, stop buffers, and protective areas can be designed to absorb shocks or reduce contact between components.
Pleasant hand feel
Not every elastic component performs a purely mechanical function. Handles, control areas, and tactile elements must feel good, be securely in the hand, and withstand the demands of everyday use.
Which solution is suitable for your component?
Not every elastic component requires the same tooling technology. The appropriate solution depends on the geometry, material, elasticity, load, quantity, desired surface finish and the question of whether a hard plastic should be combined with a soft area.
Together we will determine whether an one-part elastomer injection molding, a multi-component process or one alternative design it is technically and economically feasible.
Elastomer injection molding as a single component
A thermoplastic elastomer is injected into a mold and manufactured as a separate molded part. This variant is suitable for buffers, pads, straps, caps, rollers, and other components where the elastic function is the primary focus.
- independent elastic molded parts made of TPE or TPU
- suitable for damping, protective and adhesive friction functions
- Reproducible geometries for recurring applications
- economic production of suitable quantities
2K injection molding with hard and soft components
In 2K injection molding, a stable thermoplastic and a thermoplastic elastomer are combined in a component. For example, the hard plastic assumes the function of supporting or holding the component, while the soft component provides grip, cushioning, protection, or tactile sensation.
- hard and soft functions in one component
- less separate assembly and connection steps
- integrated grip, sealing, damping or support areas
- clear assignment of the respective material functions
Special solutions
When standard materials or standard processes are not sufficient, we think further. Together, we examine alternative material combinations, geometries, surface structures, and tool concepts.
The focus is not solely on the process itself. What is crucial is whether the finished solution will function reliably in actual use – from the initial idea to the implementation of the series production.
- Technical evaluation of suitable TPE and TPU materials
- Examination of liability, form integrity and load capacity
- Development of components with integrated elastomer function
- Joint evaluation of tools, processes and cost-effectiveness
Where elastomer injection molded parts His strengths play out
Running wheels and guided tours
For runners, supports and guide elements, friction, wear, load-bearing capacity and uniform movement are important factors. The material selection must therefore be suitable for the load and the material it is intended to resist.
Buffers and stop buffers
Buffers must absorb forces, reduce noise, and be repeatedly loadable. The appropriate material hardness and geometry determine how much a component will yield and how reliably it will return to its original shape.
Handles and haptic elements
Handles and controls combine function with direct contact with the user. Elastic materials can improve grip, reduce pressure points, and create a more comfortable tactile experience.
Cover caps and protective parts
Cover caps made of thermoplastic elastomers can protect sensitive areas from impact, dirt, or contact. At the same time, they allow for flexible assembly and a secure fit to the geometry to be covered. Elastic safety components require a balanced combination of flexibility, return behavior, and mechanical strength.
Why Filzwieser for Elastomer injection molding the right partner is?
Elastomer injection molding is then successful, when the material, geometry, tool and process all match. Therefore, we ask the right questions before production begins: What function must the elastic area perform? What loads are applied during use? Is direct adhesion possible or does a form-locking connection need to be used? And which process creates an economical, mass-produced solution?
Our claim is not the standard answer, but a solution that is technically feasible and reliable in everyday use. From the initial idea to the serial production, we accompany the development with short paths and direct coordination.

What we are distinguishes
- Experience with elastic TPE and TPU components
- Technical evaluation of material, hardness, geometry and load
- in-house toolmaking for close coordination between tool and production
- Short routes – directly with the expert, without a sales buffer

Frequently asked questions
What is the difference between a thermoplastic elastomer and classic rubber?
Thermoplastic elastomers can be heated, plasticized, and processed in injection molding like thermoplastics. Classical elastomers are usually permanently elastic due to crosslinking and cannot be easily melted again after crosslinking. Which material group is suitable depends on temperature, load, media contact, lifespan and quantity.
Can thermoplastic elastomers be recycled?
Thermoplastic elastomers can generally be reheated and processed again. However, whether and to what extent production residues or materials from secondary raw materials can be used depends on the material, property requirements, contamination, thermal stress, and the required component function. We examine such solutions on a case-by-case basis – in the sense of a circular approach rather than compromise.
What properties are important for running wheels and anti-friction pads?
Among the factors that determine the performance of a treadmill are load capacity, wear, friction and the behavior of the material with which it is in contact. In the case of friction wear applications, grip, contact area, pressure load and the desired anti-slip performance are often the focal points. The actual function always depends on the interplay of material, geometry, surface and operating conditions.
Can TPE be injected directly into a thermoplastic?
This is possible with the appropriate material combination and design. Among other things, chemical compatibility, surface quality, processing temperatures, and the load during subsequent use are crucial. Depending on the application, either direct adhesion is achieved or the bond is supported by a form-locking geometry. We assess whether the bond is reliable based on the specific requirements.